Case IH True-Tandem 335 VT

Double tap to zoom

 

Features

True-Tandem 335VT
Whether slicing through tough residue or uprooting root balls, the True-Tandem 335VT vertical tillage tool helps you level the soil to create the optimal seedbed for the next growing season. Two Earth Metal® 20-inch VT Wave Blade options — including a new longer-edge–life, 20-inch, 5 mm thick blade option — are right-sized to penetrate hard soils and break through surface compaction and properly mix residue and nutrients.

 

Achieve Optimal Field Conditions

Our vertical tillage lineup is built on proven Agronomic Design™ principles with industry-exclusive blades. The True-Tandem 335VT and 335 Barracuda helps you cover more ground in less time so your fields are ready to go when your planting window approaches.

FRAME DESIGN

Low-Maintenance Frame Engineered to Last

Our industry-leading vertical tillage technology enhances operator control, reduces maintenance and extends component life. The True-Tandem symetrical frame design provides uniform pulling pressures, improved balance and stability, and keeps you in the field longer.

FRAME

Higher Productivity

  • Increased length over competitive equipment improves for and aft leveling and overall balance
  • Mirror-matched gangs and a rugged, low-maintenance pull-through frame eliminate drift and accommodate higher ground speeds.
  • Designed with gusset plates to maximize strength and stress distribution.
  • Delivers more uniform weight per blade.

 

WHEELS & TIRES

Frame-Mounted Wheels

Our IF 210/75R15 Radial gauge wheels feature an adjustable one-way-pivot design

Better Stability and Leveling

Stabilizer wheels are bolted directly to the frame for less wobble and operators can easily set the gauge wheels for wing leveling with no wrenches

Reduce Compaction

Large, stubble-resistant tires reduce compaction in your fields

Consistent Seedbed

Standard walking-tandem design offers balance and stability, resulting in a more

HITCH

Front T-Bone Hitch/Pull Frame:

Engineered to maximize rear tractor tire clearance during tight turns, this spring cushioned hitch features the “perfect hitch” clevis for tractor pin compatibility and extra safety during hook-up.

Swivel Hose Stand

Mounted on the pull hitch, it keeps hoses and wires our of the way during hook-up and transport.

Rear Hitch

This optional feature allows for pull-type attachments for additional soil conditioning. With a vertical capacity of 1,000 pounds, this hitch is equipped with a 9-pin electronic connector for lighting and one set of hydraulic couplers.

 

LEVELING & DEPTH CONTROL

Level The Growing Field

Engage soil to your intended depth, without disrupting soil density below the seedbed.

Single-Point Hydraulic Depth Control

Easily adjust operating depth with a single hand crank, conveniently located at the front of the machine to meet your needs.

Fore and Aft Leveling

Adjust levelness from the cab using hydraulics and view the gauge from the cab to easily return to your pre-adjusted position.

EARTH METAL BLADES

Keep Your Edge With Earth Metal Blades

Stronger than ordinary carbon steel blades, our industry-exclusive Earth Metal blades help you cover rocky terrain and uneven ground in confidence — even at high speeds. Crimped center disk blades provide a tighter fit with cast iron nodular spools and add strength to the center of the blade. Perfect for no-till and minimum-till environments, these blades penetrate hard soils to help you break through surface compaction.

Wave Blade

  • True-Tandem 335 VT features 20-inch blades.
  • Get reduced compaction compared to conventional blades as each blade runs on its edge and causes soil to level without back pressure.
  • Our Robo-Sharpener™ is specifically designed to recondition and sharpen unique Earth Metal VT Wave blades.

 

Longer Edge Life VT Wave Blade

  • 20-inch blades with longer edge life are 5 mm thick and available in single-fold machines.
  • Same agronomic benefits as the VT Wave Blade, but this blade stays sharper for multiple seasons allowing for reduced maintenance.
  • Ideal for land without rocks.

 

Barracuda Blade

  • True-Tandem 335 Barracuda features 22-inch serrated blades that provide up to 4 inches of additional dept in one pass and capable of running at 6-9 mph.
  • The chisel-tip blade serrations provide longer sharpness as the valley between each blade stays sharp, even when the chisel-tipped teeth wear, allowing for greater productivity and optimal performance.

 

GANG ASSEMBLY

A Dynamic Duo for a Superior Finish

The 18-degree gang angle paired with each blade’s concavity and crimped center results in even cutting and mixing action for a superior finish. Front gang blades and rear gang blades are precisely indexed to one another, providing an even surface finish and a more even sub-surface floor than any other vertical tillage tool and high-speed disk

Disk Gang Scraper

  • The U-shaped scraper design decreases the likelihood of bending when engaged with rocks and debris.
  • Extremely versatile from dry to wet conditions

 

Arbor Bolt

  • Round, 1 ½ inch arbor bolts feature a single tightening nut
  • Holds torque more consistently than bolts with nuts on either end

 

Nodular Cast-Iron Spools

  • Stronger than gray cast-iron or steel-fabricated spools
  • Spools withstand shock loads, providing the weight necessary to cut residue and penetrate hard soil.

 

Cushion Gang Bearing

  • Equipped with standard cushion C-springs to help absorb the shock load when blades hit an obstruction.

Specifications

Model True Tandem 335VT, Single Fold 3-Section
CONFIGURATION  
Fore-aft configuratiion Blade-Blade-Rolling reel
Primary blade type, disk, coulter or turbo Wave blade
Manufacturer's description of blades Earth Metal VT Wave Blade
Dimensions and Weights  
Working width, minimum, ft-in (m) 22' 2" (6.76)
Working width, maximum, ft-in (m) 34' 8" (10.57)
Transport width, minimum, ft-in (m) 14' 6" (4.42)
Transport width, maximum, ft-in (m) 18' 0" (5.49)
Transport height, minimum, ft-in (m) 10' 5" (3.18)
Transport height, maximum, ft-in (m) 13' 7" (4.14)
Weight, minimum, lb (kg) 15,377 (6975)
Weight, maximum, lb (kg) 21,588 (9792)
Sizes available, number of widths 5
Blades  
Blade diameter, in (mm) 20 (508)
Blade spacing, in (mm) 7.5 (191)
Blade edge profile Wave pattern, can be sharpened
Blade concavity Slight concavity
Blade Mounting and Angles  
Blade Mounting, on Gangs or Standards Gangs
Front angle of gang or blades, degrees 18
Rear angle of gang or blades, degrees 18
Rolling Basket, Reel or Chopper  
Description, basket, reel or chopper Double Edge Rolling Reel
Rolling Diameter, in (mm) np
Bars or blades on circumference Formed double edge on each bar
Harrow  
Harrow tooth, spike or coil tine Coil tine optional, for rice areas only
Harrow gangs 3-bar optional, for rice areas only
Tires  
Transport tire, largest size 12.5x15 FI up to 380/60 R16.5
Wing tire, largest size 11Lx15, 8 ply or 380/60 R16.5
Tractor Power Recommendations  
Power per width of cut, hp/ft (kW/m) 7 to 11 (17 to 27)
Sales Literature  
Literature Number CIH08091401
Literature Date 8/1/2014
Secondary Source  
Secondary Source Number SP-4041-14
Secondary Source Date 6/1/2014
Status and Entry Dates  
Manufacturing status Current
First Entry Date 9/23/2014
Revision Date --

-

Model True Tandem 335VT, Double Fold 5-Section
CONFIGURATION  
Fore-aft configuratiion Blade-Blade-Rolling reel
Primary blade type, disk, coulter or turbo Wave blade
Manufacturer's description of blades Earth Metal VT Wave Blade
Dimensions and Weights  
Working width, minimum, ft-in (m) 42' 5" (12.93)
Working width, maximum, ft-in (m) 47' 2" (14.38)
Transport width, minimum, ft-in (m) 18' 6" (5.64)
Transport width, maximum, ft-in (m) 18' 6" (5.64)
Transport height, minimum, ft-in (m) 13' 4" (4.06)
Transport height, maximum, ft-in (m) 13' 4" (4.06)
Weight, minimum, lb (kg) 28,000 (12700)
Weight, maximum, lb (kg) 32,816 (14885)
Sizes available, number of widths 2
Blades  
Blade diameter, in (mm) 20 (508)
Blade spacing, in (mm) 7.5 (191)
Blade edge profile Wave pattern, can be sharpened
Blade concavity Slight concavity
Blade Mounting and Angles  
Blade Mounting, on Gangs or Standards Gangs
Front angle of gang or blades, degrees 18
Rear angle of gang or blades, degrees 18
Rolling Basket, Reel or Chopper  
Description, basket, reel or chopper Rolling Reel
Rolling Diameter, in (mm) 14 (356)
Bars or blades on circumference Flat or round bars, spiral pattern
Harrow  
Harrow tooth, spike or coil tine Coil tine optional, for rice areas only
Harrow gangs 3-bar optional, for rice areas only
Tires  
Transport tire, largest size 16.5Lx16.1 FI up to 440/55 R18
Wing tire, largest size 12.5Lx15 FI
Tractor Power Recommendations  
Power per width of cut, hp/ft (kW/m) 7 to 11 (17 to 27)
Sales Literature  
Literature Number CIH4220807
Literature Date 4/1/2008
Secondary Source  
Secondary Source Number SP-4038-13; SP-4041-14
Secondary Source Date May, 2013; June, 2014
Status and Entry Dates  
Manufacturing status Current
First Entry Date 9/23/2014
Revision Date --